Juniper EX2300 MultiGig Switch
The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. Both 1 Gbps and 2.5 Gbps access port options are available to provide higher-speed options, especially when connecting to 802.11ac Wave 2 access points.
For small networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch.
The EX2300 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. Mist Wired Assurance delivers better experiences for connected devices through AI-powered automation and service levels.
Contact us with any questions or for a quote at +1 415-800-2050 or sales@lightwiresystems.com.
*See below for additional information on variant EX2300 Multigigabit switches and EX2300 Multigigabit parts and licenses.
The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. Both 1 Gbps and 2.5 Gbps access port options are available to provide higher-speed options, especially when connecting to 802.11ac Wave 2 access points.
For small networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch.
The EX2300 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. Mist Wired Assurance delivers better experiences for connected devices through AI-powered automation and service levels.
Contact us with any questions or for a quote at +1 415-800-2050 or sales@lightwiresystems.com.
*See below for additional information on variant EX2300 Multigigabit switches and EX2300 Multigigabit parts and licenses.
The Juniper Networks EX2300 Ethernet Switch offers an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. Both 1 Gbps and 2.5 Gbps access port options are available to provide higher-speed options, especially when connecting to 802.11ac Wave 2 access points.
For small networks, up to four EX2300 switches can be interconnected in a Virtual Chassis configuration, allowing them to be managed as a single switch.
The EX2300 is onboarded, provisioned, and managed in the Juniper Mist Cloud Architecture. Mist Wired Assurance delivers better experiences for connected devices through AI-powered automation and service levels.
Contact us with any questions or for a quote at +1 415-800-2050 or sales@lightwiresystems.com.
*See below for additional information on variant EX2300 Multigigabit switches and EX2300 Multigigabit parts and licenses.
Product Information
Each EX2300 switch includes an ASIC-based Packet Forwarding Engine (PFE) with an integrated CPU to consistently deliver wire-rate forwarding, even with all control plane features enabled. Based on existing, field-proven Juniper Networks technology, the PFE brings the same level of carrier-class performance and reliability to the EX2300 switches that Juniper Networks routers bring to the world’s largest service provider networks.
Select EX2300 models also support the 802.3af Class 3 Power over Ethernet (PoE) and 802.3at PoE+ standards for supporting networked devices such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones in converged networks. The PoE-enabled EX2300 switches include a maximum system budget of 750 watts to deliver up to 30 watts to select ports.
Multiple EX2300 models are available, including versions offering multigigabit (up to 2.5 Gbps) PoE+ access ports that can accommodate higher-speed IEEE 802.11ac Wave 2 access points, enabling the switches to support more wireless users.
The EX2300 fixed-configuration Ethernet switches provide exceptional value to enterprise customers by supporting the following key technologies:
‣ Virtual Chassis technology enables up to four interconnected EX2300 switches to form a single logical
device.
‣ Flexible 1GbE SFP/10GbE SFP+ uplinks provide high-speed connectivity to aggregation layer switches or
other upstream devices.
‣ Up to 48 10/100/1000BASE-T ports are available with or without PoE/PoE+.
‣ Models offering 24 and 48 multigigabit ports support 1GbE/2.5GbE on 8 and 16 ports, respectively
‣ Energy Efficient Ethernet (EEE) support is provided on 1GbE ports.
‣ Complete Layer 2 and basic Layer 3 switching capabilities are available.
‣ Simplified onboarding and management with Juniper Mist Wired Assurance.
Specs
‣ Form factor: Fixed 1 U access
‣ Port density: 24-48 + SFP/SFP+ 10GbE
‣ Wired Assurance: Yes
‣ Campus Fabric: Virtual Chassis
‣ Cloud Managed: Yes
‣ Dimensions (W x H x D):
— EX2300-24T/24P/48T: 17.4 x 1.75 x 10.2 in (44.19 x 4.45 x 25.9 cm) - 1 rack unit
— EX2300-48P: 17.4 x 1.75 x 12.2 in (44.19 x 4.45 x 30.98 cm) - 1 rack unit
‣ Backplane speed: 80 Gbps
‣ Data rate: EX2300-24P/24T: 128 Gbps/EX2300-48T/48P: 176 Gbps
‣ Throughput:
— EX2300-24P/24T: 95 Mpps (wire speed)
— EX2300-48T/48P: 130 Mpps (wire speed)
‣ Resiliency: Integrated power supply and fans
‣ Traffic monitoring: sFlow
‣ Quality-of-service: (QoS) queues/port 8
‣ MAC addresses: 16,000
‣ Jumbo frames: 9216 bytes
‣ IPv4 unicast/multicast routes: 4096 / 2048
‣ IPv6 unicast/multicast routes: 2048 / 1024
‣ Number of VLANs: 4093
‣ ARP entries 1500
Variant Product Details
Lightwire Systems offers the following EX2300 variants:
EX2300-24MP
24-Port 10/100/1000/2500 Mbps RJ-45 Switch with Four 1 GbE/10 GbE Uplink/Stacking Ports
EX2300-48MP
48-Port 10/100/1000/2500 Mbps RJ-45 Switch with Six 1 GbE/10 GbE Uplink/Stacking Ports
Part Numbers & Descriptions
Lightwire Systems offers the following EX2300 Series parts & licenses:
EX2300-C-CBL-GRD
Cable Guard for EX2300-C
EX2300-C-MGNT-MNT
Magnet Mount for EX2300-C
EX2300-C-RMK
Rack Mount Kit for EX2300-C
EX2300-VC
EX2300 Virtual Chassis License
**Please Contact for Full License Options
Terms of Service
Lightwire Systems buys, sells, and trades new and used networking equipment. Customer acceptance of the equipment sold by Lightwire Systems binds both parties to the following terms and conditions:
QUOTES
Upon request, we will provide you with an written quote. Quoted and actual price/availability/delivery on all equipment may slightly vary due to time elapsed between quote and purchase, market supply/demand conditions, inventory status. We will honor a quote for a minimum of 30 days, please discuss with your client advisor longer quote time is needed.
CANCELLATIONS
Orders once placed may not be canceled without good cause. Please contact your client advisor with any changes and we will do our best to accommodate or address any concerns.
RETURNS & EXCHANGES
If you are not 100% satisfied with your purchase and it is within 30 days of delivery, and the product was sold from existing stock, we will accept the return of the working item in the same condition and packaging it was received subject to a 20% restocking fee. If a product was purchased specifically to fill your order and was not available in our inventory at that time, it is non-returnable. Customer is responsible for any freight charges on all returns.
PACKAGING
We use foam, bubble rap, sturdy boxes and professionally pack all hardware. In the event the item arrives damaged, immediately contact your client advisor. Lightwire Systems will work with the customer to address any issues due to damage during shipping and will work diligently to make sure you have working hardware as soon as possible.
SHIPPING
UPS and FED-EX are our shipping partners of choice, however we’re happy to accommodate other shipping partners per a customer’s request.
SALES TAX
Customers are subject to the sales tax rate per their region. Tax exempt organizations must provide us with their tax number when placing an order or will be charged sales tax.
CONDITION - WARRANTY - EXCHANGE
We sell used, unused in original box, and new equipment. All used hardware is fully tested and guaranteed fully functional before sold and comes with an advanced replacement one-year warranty (advance replacement due to failure will be shipped express to ensure your downtime is minimal). New hardware will come with original manufacturer warranties. Warranty covers DOA equipment or equipment failing to perform to manufacturers specifications. Warranty does not cover misuse and/or damage due to improper installation and/or operation of the equipment. No item can be returned without prior authorization. We will repair, exchange, or refund the equipment under warranty within 5 working days after its receipt at our warehouse. All equipment is subject to prior sale.
Related Products
Call us at +1 415-800-2050 to speak with one of our client advisors, or email us to schedule a time to discuss your project.